The Automotive Shop Equipment Megastore!

The most complete line of Automotive Equipment on the Planet!

The selection that solves your automotive equipment needs!

Back to: Welding or Paint & Auto Body Index.

Handler 125 Portable Welder

Rugged and portable, the Handler 125 operates off 115-volt household current. Comes ready to weld without shielding gas using .030-.035 in (0.8-0.9 mm) flux cored wire. For greater versatility, consider the Handler 125 MIG (or upgrade the Handler 125 with the optional MIG conversion kit.) This unit has a solenoid valve installed for welding with .023-.030 in (0.6-0.8 mm) solid wire and gas shielding. Use C-25 gas (75% argon/ 25% CO2) on 22 gauge - 1/8 in steel for a cleaner weld with less spatter. Use Tri-Mix gas and stainless wire for welding on 16-12 gauge stainless steel.

Hobart Handler 125 Portable Welder
Great Features:

Welds 20 gauge up to 3/16 inch steel with flux cored wire.
Proven built-in wire feeder with quick-release drive roll tension lever.
Built-in contractor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding.
Four output voltage settings with wire feed speed tracking provide quick and easy adjustment for different materials and thickness.
Separate "fan only" or "purge" setting to purge gas line and set flow rate without wasting wire.
Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6mm) and .030 - .035 in. (0.6 - 0.9 mm) wire.
Self-resetting thermal overload and motor protection.

Comes Complete With:

Comfortable 8 ft (2.4 m) H-9 gun with liner for .023-.035 in (0.6-0.9 mm) wire.
Three .030 in (0.9 mm) contact tips.
Work clamp with 10 ft (3 m) work cable.
1 lb spool of .030 in (0.9 mm) self-shielding flux cored wire.
Spool shaft to accommodate 4 in spools (Optional hub kit available for 8 in spools).
Power cord with plug.
Weld set-up and parts information chart.
Handler 125 with optional MIG kit available.
The Handler 125 MIG also includes a gas solenoid valve, Argon-mix regulator and 5 ft (1.5 m) gas hose.

Specifications

Rated Output	90 amps at19VDC, 20% duty cycle(Standard) 63 amps at 21VDC, 20% duty cycle(MIG)
Max. Open-Circuit Voltage	29 V
Amperage Range	30-125 amps
Wire Feed Speed Range	0-415 IPM (0-11 MPM) - (Standard) 0-500 IPM (0-13 MPM) at no load - (MIG)
Amps Input at Rated Output, 60 HZ, 1-Phase	115 V	KVA	KW
	20	2.9	2.5

Dimensions (H x W x D)	16 7/8" x 9 7/8" x 121/8"
Weight	50 lbs (22.7kg)

Accessories

Model #	Item
#770187	Running Gear/Cylinder Rack
#194776	Small Running Gear/Cylinder Rack

Back to: Welders or Paint & Auto Body Index.

Auto Lifts • Tire Changers • Wheel Balancers • Brake Lathes • Pipe Benders • Paint Booths
Frame Machines • HVAC • Service Jacks • AC Service • Site Map • Helpful Resources • Links

Last Updated: Sunday, 07-Sep-2008 19:28:11 EDT