Waste Oil Fueled Evaporators Evaporators are used for a number of processes to separate liquids having different specific gravities and to remove water from solutions to concentrate the remaining components for reduction of disposal costs. The INOV8 evaporator goes one step further - it uses the oils separated from the water to fuel the evaporator. Wastes generated from machine coolants, mop water, wash solutions, process waters and/or rinse solutions can be evaporated away leavings oils and solvents, which are then used to fuel the burner that heats the water in the evaporator. These are perfect systems for environmentally conscious companies.

Why INOV8?

Stack Emissions

Return on Investment Calculator

Typical Installations

INOV8 now offers four sizes of waste oil fueled evaporators having capacities of 15 to 60 gallons of water evaporated per hour. There are numerous evaporator manufacturers but none that offer one fueled by waste oils. There has been a huge increase in demand for evaporators (natural gas, fuel oil and electricity) because of increasing environmental restrictions and disposal costs. For example many states are adopting regulations that prohibit the dumping of wastewaters that previously were allowed in city sewer systems. Waters used for washing vehicles, floors, and equipment and for other cleaning purposes are just some examples. Without an evaporator this water must be collected, stored in barrels and taken by waste collection companies that charge high disposal fees. There is a strong desire to reduce government bureaucracies that infiltrate our businesses and this product provides that opportunity.

Evaporate Up To 60 Gallons Per Hour

We are the leaders in alternative fuel burners Diesel fuel, crankcase oil, and combustible coolants and more can be used to fuel our exclusive waste oil evaporators. There are four standard sizes of evaporators - 10,20,40 and 60 gallons per hour. Custom orders for larger sizes are available. The burners are registered in Europe with the CE(#3884-97) label and are EPA approved.

Evaporator Standard Specifications & Options

Burner	INOV8 Model B200
Evaporation Rate	Up to 60 Gallons per Hour
Tank Material	10 gauge - 304 stainless steel
Combustion Chamber Material	10 gauge - 304 stainless steel
Tank Capacity (Gallons)	150 - 500
Outer Shell Material	18 gauge mild steel, powder coat paint
Tank Bottom Design	V shaped to ensure sludge removal
Tank Insulation	4" of single fiberglass
Vent	Provisions for double wall 8" stack
Clean Out Port	Full access for combustion & evaporator areas
Inlet Port	3/4" NPT with fill pipe
Electrical	120 volt, 20 amp service
Shipping Weight	800 - 3000 lbs.
Warranty	One year
Options
Exhaust Blower	1600 CFM @ 1" SP centrifugal impeller blower wheel
Oil Skimmer for Corrosive Waste	316L stainless steel construction or AL6-XN
Custom Sizes	Upon request