Why Purchase An INOV8?

1 . Clean Burning – The following features combine to produce nearly complete combustion evidenced by low stack temperatures, no carbon monoxide molecules, a low percentage of oxygen and a light powdery ash.

• Oil is preheated to 185° F providing a hotter flame and complete combustion.
• Filtering the oil before and after it’s heated prevents nuisance shutdowns.
• Higher oil and air pressures produce a finer oil mist ensuring better combustion.
• The Patented Needle Valve - seals in the nozzle opening to prevent oil from flowing into the combustion chamber during shutdown. It also pushes out any debris blocking the nozzle and provides for an instant flame upon startup.
• The Vapor Eliminator - Waste oils contain water and various gases that will vaporize as the oil is heated. The flame would be interrupted if these vapor bubbles passed through the oil nozzle causing unstable dirty combustion. The INOV8 patented preheat system extracts vapor from the oil to provide a stable clean flame.

2. Flexibility of Fuels – Because of these unique features, the INOV8 system can efficiently consume crankcase oils, gear box oils (85 – 140 wt), up to 175 wt heat transfer oils, transmission & hydraulic oils, vegetable and synthetic oils without having to change oil or air pressure settings. We also have applications that are burning jet fuels, mineral spirit solvents and some petroleum-based printing inks. The competition typically can only burn middleweight lubricating oils.

3. Low Operating Costs – Due to our superior engineering and workmanship there is a very low incidence of warranty claims and repair costs. We strive to keep operating costs low, for example there is no requirement for annual repairs or replacement of parts. The burner has been designed so that most repairs can be done on-site by the owner. Our furnaces and boilers have convenient access doors to allow for vacuuming of the ash leftover from burning lubricating oils. All components are easily changed out and don’t require the replacement of a module or group of parts because of the failure of one component. The INOV8 Instruction Manual includes details for a successful installation, for normal operation, routine maintenance, and step-by-step troubleshooting instructions. In the event you do need assistance our technical support is the finest in the business. All parts are stocked and available for overnight delivery if needed to keep downtime to a minimum.

4. Safety - The Fireye Control provides the brains for the INOV8 burner. Safety is our highest priority and is the reason we use the only industrial rated electronic burner control in the industry with a UV sensor, pre-purge, pre-heat, and auto-restart ignition plus safety lockout. Competitors use a control intended for residential furnaces that burn a clean and reliable fuel oil that has a flash point of 100°F. Waste oil has flash points ranging from 290°F to over 500°F and is anything but clean and reliable. In addition,

• The Ultra-violet (UV) Sensor monitors the flame in the combustion chamber and will recognize an improper flame caused by after-burn and shut off the oil supply within 4 seconds. Competitors use a cadmium sensor that isn't capable of differentiating between a normal flame and improper flame and will continue to deliver oil in either case. Also, if ignition fails during startup oil will be delivered for up to 45 seconds causing dirty combustion, smoky after-burn and the unsafe accumulation of fumes.
  
• The Ultra-violet sensor will not allow a positive draft to carry flue gases back into your building. The UV sensor cannot see through fumes caused by a backdraft and will shut the burner down requiring a correction of the draft problem before continued operation.