The Automotive Shop Equipment Megastore!

The most complete line of Automotive Equipment on the Planet!
Information
Request
The selection that solves your automotive equipment needs!
Model Text Tips

Back to: Wheel Service or Tire Changers index.

High Performance Tire Changer Accu-Turn 5602 & 5602HP

High Performance Tire Changer

Accu-Turn 5602 & 5602HP

Accu-Turn's best pneumatic tilt tower High Performance Tire Changer. Designed for high volume shops doing run flat, low profile and high speed rated tires daily.

Features and Highlights

  • New expanded 25" outside clamping ability standard
  • Automatic tilt tower design features pneumatic locks & mount/de-mount head retractor
  • Extra wide base, eliminates turntable interference while bead breaking
  • Two position bead breaker for wider performance tires
  • Convenient storage bins with built-in gauge, hose and bleeder valve.
Pneumatic mounting helper (optional for 5602, standard for 5602HP) provides hands-free mounting of the most difficult high performance low profile tires:
  • Top roller drives bead into drop center
  • Pneumatic bead depressor holds tire in drop center during remount
  • Bottom roller assists in lifting tire during dismount
Convenient storage bins with built-in inflation gauge, hose and bleeder valve. Non-opposing 3-position adjustable jaws. Outside clamps up to 25” with integrated plastic protection to eliminate wheel damage.

Inflation jets built into the clamps ensure maximum pressure where you need it, when you need it.

Extra wide base eliminates turntable interference while bead breaking, as well as creating a convenient pedal location. Two position bead breaker.

Specifications

TIRE DIAMETER 40", 1016 cm
RIM/TIRE ASSEMBLY WIDTH 15", 375 cm
RIM WIDTH 15", 375 cm
TURNTABLE/OUTSIDE CLAMPING 10-25", 254-635 MM
TURNTABLE/INSIDE CLAMPING 12-28", 305-711 mm
BEAD BREAKING POWER 5600 lbs., 2541 kg
AIR PRESSURE REQUIREMENT 110-170 psi, 7.5-11.7 bar
MOTOR 1 HP
ELECTRICAL REQUIREMENT 120 vac; 20 A; 60 hz
WEIGHT 710 lbs., 322 kg
OVERALL DIMENSIONS: Width 43", 1092 mm
OVERALL DIMENSIONS: Depth 52", 1321 mm
OVERALL DIMENSIONS: Height 75", 1905 mm

Pneumatic Mounting Helper

Pneumatic mounting helper (optional for 5602, standard for 5602HP) provides:
  • Hands-free - Easy mounting of the most difficult high performance low profile tires.
  • Integrated top roller - Easily rolls top bead down, bead depressor holds the bead in the drop center, preventing accidental reseating.
  • No scratching - Tire changer never touches rims, removing any danger of accidental damage.
  • Simple operation - 15 minutes average training time.

  1. Top roller is used to depress the bead into the drop center as well as safely & easily roll the second bead onto the rim in the remount cycle.

  2. The multi-pivot point bead depressor both holds the bead into the drop center as well as follows the tire around during the remount cycle. It eliminates the need for any bead clamping devices.

  3. Lower disk may be used to apply upward pressure on the lower bead in the de-mount cycle as well as lift the tire.

Back to: Wheel Service or Tire Changers index.

Auto Lifts • Tire Changers • Wheel Balancers • Brake Lathes • Pipe Benders • Paint Booths
Frame Machines • HVAC • Service Jacks • AC Service • Site Map • Helpful Resources • Links

Last Updated:

Copyright © 2004 America's Pride Inc. - Over 5,000 products ready for shipping.