SERVO PROGRAMMABLE ELECTRIC ROTARY DRAW BENDER

• Servo Motion Controls tubing bender allows user to store over 100 programs, with up to 32 bends per program
• This tubing bender has a maximum capacity of 2.5" Schedule 40 pipe, 3" tube (.187 wall thickness), 3" square tubing (.093 wall thickness)
• The operator interface allows for quick, accurate repeatability of multiple or single bends.
• Extra heavy duty design normally seen on larger models means more value for the investment.
• Quick release counter die system allows for maximum efficiencies for high production runs.
• Maximum bend is 180 degrees (plus spring back up to 206 degrees).
• The model 400 tubing bender has a maximum bend speed of 6 seconds at 180 degrees.
• This tubing bender has a larger CLR than most competing tube benders. The maximum CLR is 22".
• Power is 240 V, single phase, 60 Hertz, 30 amp
• Weight is approximately 1200 lbs (solid steel construction)
• Similar to other RMD programmable tubing benders, the model 400 can be fitted with a rotary positioning table allowing for accurate bends in varying planes, as well as consistent measurements between bends.
• Bend Material : Round or square tubing, pipe, flat stock, angle iron, or solid rod.
• Height : 46"
• Length : 69"
• Width : 32"
• Weight : 1200 Ibs
• Power : 30A; 220V; 1PH; 60C
• Maximum CLR : 16"
• Maximum Bend : 206 degrees
• Capacity : 2 1/2" Schedule 40

Material / Maximum Capacity / Max Wall Thickness

• Pipe (I.D.) / 2 1/2" / Schedule 40
• Tube (O.D.) / 3" / .187"
• Chromolly / 2-1/2" / .125"
• Square Tube / 3" x 3" / .093"
• Flat Stock / 1/2" x 3" / ---
• Angle Iron / 3" x 3" x 1/4" / ---
• Solid Rod (O.D.) / 1 1/2" / ---
• Aluminium (O.D.) / 3" / .250"
• Stainless (O.D.) / 3" / .125"

OPTIONS

• HD (Heavy Duty Option) : Brings Capacity to 3" Schedule 40, (up to 3.5" tubing depending on wall thickness).
• Rotary positioning table available in various table lengths for repeatable bends in a single piece of material. Allows for accurate bends in varying planes, as well as consistent measurements between bends.