The World's First Waste Oil Fired Air Conditioner! Don't pay those high and ever increasing energy costs, recycle your waste oil into Low Cost Air Conditioning. Reduce the cost of air conditioning by 50-75 percent by burning waste oils on site. Burn used oils on site to eliminate removal costs and the "forever" associated liability. Can also burn gas or propane as a backup when servicing for constant cooling. OMNI offers more at a competitive price, the best bargain, the obvious choice!
- Air Conditioner Features
- High Grade Stainless Steel with galvanized sheeted cabinets for long life in outside applications - Patented, waste oil direct fired absorption Air Conditioner Design. We successfully adapted our waste oil burner technology to the time tested and proven gas fired air conditioner design. It's performance exceeded our engineers' expectations!
- Easy Access - Lift out 3 large cabinet doors and removal of 2 securing nuts on swing out combustion chamber is all that is needed to allow easy access for occasional cleaning and service, when needed.
- Dual Purpose Manifolds - When burning waste oil, timed airblast manifolds self-clean the generator keeping ash deposit build up to a minimum, thus reducing required cleaning intervals. As backup to waste oils, automatically our manifolds will burn gas or propane to ensure constant cooling, while performing routine cleaning.
- Self-Diagnostic Processing Circuit Board
- Standard Equipment
- Unit can be mounted horizontal or vertical
- Easily adapts to existing ductwork or new construction
- Chilled water in/out piping hookups (depending on mounting direction)
- Water in/out regulators
- Water in/out pressure gauges
- Air purge vent (at highest point of water piping)
- Thermal P/T wells (pressure/temperature)
- Room Thermostat
- Standard Water Circulator Pump - suitable in 80% of applications (may need larger pump depending on application, at an additional cost)
- Direct drive motor and insulated cabinet
- Built-in 3 speed 3/4 hp direct drive squirrel cage blower
- Chilled water type A-Coil air handler/exchanger
OMNI's Patented Flame Control SystemDesigned and constructed waste oil burning equipment that reached a level of performance the industry considers unattainable! - Our patented complete waste oil burning system with a universal burner mounting flange allows easy retrofit of our burner system to various configuration and sizes of combustion chambers. Initial flame adjustment is all that is needed with complete control thereafter.
System BenefitsNon-carboning oil heater block - cleaning not required
A thorough burn - greatly reducing ash deposit accumulation
Only system that can burn straight 90 weight oils
Less stress on metals - can't overfire. No target burn-out
Clean heater once a season under normal conditions
The most reliable, consistent operation
Greater efficiencyVariably controlled, A/C converted, D/C gear motor driven waste oil pumpOil Primer Switch
Inline Breaker
Oil Pressure Gauge - Bench mark indicator for proper flame length adjustment and filter pump screen or valve cleaning requirements.
Cleanable Strainer Oil Filter - removal of one nut for screen access.
Oil Shut-Off Valve - eliminates start delays due to possible drain back.
Adjustable Motor Speed - initial set-up only - once set, no adjustment needed thereafter.Patented Oil Preheater Air Conditioner SpecificationsNominal Capacity (Tons) - Standard Conditions of 95 degrees : 5
Delivered Cooling Capacity, BTU/H : 60,000
Waste Oil, BTH/H Input : 150,000
Gal. per Hr. Consumption : 1
Chilled Water Data
Return Water Temperature : 55.0 degrees F
Supply Water Temperature : 45.0 degrees F
Chilled Water Flow, GPM : 12.0
Allowable External Friction - Loss for piping and coil, feet of water : 25
Chiller Electrical
Required Voltage, 60Hz, Single Phase : 208/230
Condenser Fan Motor : 1/2 hp
Full Load/Locked Rotor Amps : 3.5/7.2
1 Free Air Fan 1 at 1/4 hp : 1.0
Chiller Only KW Consumption : 2.15
Minimum Circuit Ampacity (MCA) : 9.81
Maximum Over Current Protection (MOCP) : 20 amp
Electrical Entrance Knockouts, Diameter : 7/8"Waste Oil Burner Electrical
Voltage 60Hz (one leg) : 230V
Burner Motor 1/4 hp : 2.2
Transformer amps : .35
Oil Supply Pump Motor amps : .62
Heater Element amps : 2.0
Oil Primary Control amps : .2
Burner amps avg. : 6.7
Burner only KW : 1.25
Combine total unit amps; Chiller with Burner : avg. 15.5
Combine total unit KW; Chiller with Burner : 3.41
Dimensions (LxWxH) : 91" x 51" x 33.5"
Weight : 930 lbs.
Shipping Weight : 980 lbs. |
