Photo Gallery (1 photos)

$2,900.00

Air flows in through the filtered air intake plenum (located in the ceiling toward one endof the booth) downward through the work areaand into the exhaust chamber located in thelower opposite end of the room. Filteredexhaust air is drawn through the exhaustplenum and is discharged upward into theatmosphere through the exhaust stack.

Note: Other dimensions are available, please call for details

• Features
  • Lighting Features -Bright full booth illumination is provided by four-tube, 48", 32-watt, fluorescent light fixtures in the ceiling panels. Each is sealed behind clear tempered safety glass. All fixtures are UL listed and approved for their intended use and placement. The light tubes are not furnished with the fixtures
  • All cabin and plenum sections are made with 18-gauge steel. The personnel access door is prehung in heavy gauge steel galvanized frames for easy installation. Brixon™ latches are provided for the door opening. One 14" x 48" observation window is standard in all paint mix room personnel doors.
  • The exhaust system is driven by a 14" diameter tubeaxial fan with a 1/2 HP motor, producing 1930 SCFM at 1/2" static pressure.
  • All hardware, filters and sealants needed for installation are included. The control panel and other electrical components may be purchased seperately.
• Specifications
  • Interior Dimensions : 8' x 8' x 8'
  • Exterior Dimensions : 8'4" x 8'2" x 10'6"
  • Access Doors : 1 with window
  • Lights (Open) : 1
  • Lights (S and G) : 0
  • SCFM : 1930
  • Fan Diameter : 14"
  • HP : 1/2 HP
  • Filters (Int.) : 4
  • Filters (Exh.) : 2