220V, Heavy Duty, 20 Programs, Foot Pedal - Forward and Reverse
"We have been struggling with 90° consistent bends on 2" Stainless Sch 40 Pipe, we purchased a RMD 350 bender and solved our problem. The staff was excellent to work with, they even let us bring in pipe to test the machine. Also purchased a notcher, notches fit every time, Excellent."
P&D Metal Works, Inc.
(Click Play above to view a video about our Model 350 Rotary Draw Bender.)
(Please note this machine has had design enhancements since the filming of this video.)
- Features
- Programmable Electric Tubing Bender
- This tubing bender has a maximum capacity of 2.5" Schedule 40 pipe, 3" tube (.187 wall thickness), 3" square tubing (.093 wall thickness)
- The OCS (Operator Control Station) allows for quick, accurate repeatability of multiple or single bends. Unit can store up to 20 programs with 10 bends per program. The OCS unit is extremely easy to program.
- Extra heavy duty design normally seen on larger models means more value for the investment.
- Quick release counter die system allows for maximum efficiencies for high production runs.
- Maximum bend is 180 degrees (plus spring back up to 206 degrees).
- The model 350 tubing bender has a maximum bend speed of 6 seconds at 180 degrees.
- This tubing bender has a larger CLR than most competing tube benders. The maximum CLR is 22".
- Power is 240 V, 3 phase, 60 Hertz, 30 amp
- Weight is approximately 1200 lbs (solid steel construction)
- Similar to other RMD programmable tubing benders, the model 350 can be fitted with a rotary positioning table allowing for accurate bends in varying planes, as well as consistent measurements between bends.
- Bend Material : Round or square tubing, pipe, flat stock, angle iron, or solid rod.
- RMD tube benders are made in America!
SPECIFICATIONS
- Height : 46"
- Length : 69"
- Width : 32"
- Weight : 1100 Ibs
- Power : 30A; 220V; 3PH; 60C
- Maximum CLR : 16"
- Maximum Bend : 206 degrees
- Capacity : 2 1/2" Schedule 40
Material / Maximum Capacity / Max Wall Thickness
- Pipe (I.D.) / 2 1/2" / Schedule 40
- Tube (O.D.) / 3" / .187"
- Chromolly / 2-1/2" / .125"
- Flat Stock / 1/2" x 3" / ---
- Angle Iron / 3" x 3" x 1/4" / ---
- Solid Rod (O.D.) / 1 1/2" / ---
- Aluminium (O.D.) / 3" / .250"
- Stainless (O.D.) / 3" / .125"
OPTIONS
- Rotary positioning table available in various table lengths for repeatable bends in a single piece of material. Allows for accurate bends in varying planes, as well as consistent measurements between bends.
