We apologize at this time we do not yet have a description for this product.

If you are interested in this product and would like to learn more we encourage you to speak to one of our sales representatives.

You may dial the number above

Mon-Thurs: 9am-7:30pm (EST)
Friday: 9am-6:30pm
Sat: 10am-2pm

• Features
  • Programmable electric tubing bender
  • To program a bend, simply turn the degree hand wheel to the desired bend angle (include spring back). When performing a bend, the die head automatically stops at the degree indicated on the numerical counter. Allows for accurate repeatability when performing one or multiple bends. No complicated electronics to program.
  • Lead screw indicator ensures repeatable counter die positioning for multiple bends.
  • In return mode, the die head stops in the home position.
  • Remote Operator Interface allows operator to control the bend.
  • Die sets are interchangeable with all RMD tube bender models.
  • Bend can be advanced after stopping machine, saves on set up costs (material savings).
  • Power : 110 V, 1 HP, Single Phase, 20 amp, 60 cycle (other electrical specifications available).
  • Bend Material : Round or square tubing, pipe, flat stock, angle iron, or solid rod.
  • Fast Change Over : Dies and counter dies can be changed out in a matter of seconds, no tools required.
  • Maximum Bend Speed : 11 seconds on a 90 degree bend
  • Maximum Bend is 180 degrees (machine limit is 202 degrees).
  • The Model 200 tubing bender is equipped with a lead screw indicator that ensures repeatable counter die positioning for multiple bends.
  • All die sets are color coded for easy identification (green for pipe, blue for tube, and gray for square).
  • Capacity is up to 1-1/2" Schedule 40 Pipe (up to 2.0" tube, depending on wall thickness and CLR).
  • Simple operating controls : On/off, forward/reverse, and degree handwheel.
  • Custom dies available.
  • Maximum capacity is 1.5" Schedule 40 pipe, 2" tube (depending on wall thickness).
  • Like on all RMD tubing benders, the bend can be advanced after stopping machine, saves on set up cost (material savings).
  • Optional rotary positioning table allows for accurate bends in varying planes.
  • RMD tubing benders are made in America!

  SPECIFICATIONS

  • Height : 44"
  • Length : 38"
  • Width : 26"
  • Maximum CLR : 9"
  • Maximum Bend : 206°
  • Capacity : 1-1/2" Schedule 40
  • Approximate Weight : 540 lbs.

  Material / Maximum Capacity / Max Wall Thickness

  • Pipe (I.D.) / 1-1/2" / Schedule 40
  • Tube (O.D.) / 2" / .095"
  • Chromolly / 1-3/4" / .083"
  • Square Tube / 1-1/2 x 1-1/2" / .125"
  • Flat Stock / 1/4" x 2" / ---
  • Angle Iron / 1/1/4" x 1-1/4" x 1/8" / ---
  • Solid Rod (O.D.) / 1" / ---
  • Aluminium (O.D.) / 2" / .125"
  • Stainless (O.D.) / 2" / .125"

  OPTIONS

  • Power : Three phase available
  • Micro processor controls in place of dialing in bend angles
  • Rotary positioning table available in various table lengths for repeatable bends in a single piece of material. Allows for accurate bends in varying planes, as well as consistent measurements between bends