Back to Frame Machines Index

Lift Master

2 Values - 1 Up/1 Down for Easy, Controlled Operation Hold up safety lever before opening down value. Open slowly - Allow air to release slowly. Pinchweld fits into slot by rolling Lift Master under the vehicle, raising the lift to put slight pressure on the pinchweld. then moving the jack in and out until the pinchweld slips into the groove. Apply more air pressure and check to make sure pinchweld is in groove. Raise car slowly. Pads can be turned sideways - pin can be pulled and arms removed and turned over for additional height. Do Not get under car without secondary support.

Back to Frame Machines Index

To place order go to Product Catalog, fax or mail us order form or lease application, or use our contact information.