- ECONOMICALLY PRICED
- MINIMUM SHOP SPACE REQUIRED
- EASY TO INSTALL
- MEETS ALL QUALITY CODE STANDARDS
DESCRIPTION
This Economy Booth is a very affordable filtered air enclosure
that is well lit and designed to fit in very close shop areas.
The booth is a crossdraft design that intakes fresh air through
filters in the product entry doors. The clean, filtered air
is then drawn across the length of the booth and exhausted through
filters at the back.
LIGHTING FEATURES
Bright full booth illumination is provided by nine
48” four-tube, 32-watt fluorescent light fixtures.
The lights are mounted in the side walls and
ceiling panels behind clear tempered safety
glass and sealed with a gasket. All fixtures are
UL listed and approved for their intended use
and placement. The light tubes are not furnished
with the fixtures.
INSTALLATION
Installation is easy. The booth is a series of panels
with external pre-punched flanges that are bolted
together and specifically designed to enable the
end user to add or subtract a 2'-6" panel, one
section at a time.
Product and personnel door hinges are welded in
place to their adjacent doors and panels. All hardware,
filters and sealants needed are included.
Complete, step-by-step installation instructions
are furnished with each spray booth unit.
CONSTRUCTION FEATURES AND QUALITY STANDARDS
All booth and plenum sections are made with 18-
gauge galvanized steel. Brixon™ latches and limit
switches are provided for each door opening.
Exhaust is provided by a 30" tubeaxial fan with
a 2HP, three-phase motor. The control panel and
other electrical components may be purchased
separately.
Our Spray Booth products comply with all OSHA and NFPA
regulations.
Specifications
| Model # |
Int. Dimen. |
Ext. Dimen. |
Access
Doors |
Lights
Open |
Air
Flow
SCFM |
Fan Spec. |
Filters |
| Dia. |
HP |
Int. |
Exh. |
| ECONOMY-25-SB |
13'8" x 8' x 25'4" |
14' x 8'2" x 25'8" |
1 |
9 |
10800 |
30" |
2 |
16 |
20 |
Back to Paint Booths Index |
