- EASY TO INSTALL
- EASY TO OPERATE
- EASY TO MAINTAIN
- EASY TO PRESSURIZE
DESCRIPTION
The SD-4000 Series Semi Downdraft Booth intakes fresh air from
the cleaner upper levels of the shop through a filter bank located
in the booth ceiling near the product doors. The filtered air
is drawn down through the booth to an exhaust filter system
at the other end. This booth is equipped with a pre-filter plenum
for additional intake air filtration.
The basic modified downdraft design allows for
easy pressurization with the addition of an intake
fan or a heated air make up unit.
LIGHTING FEATURES
Bright full booth illumination is provided by ten
four-tube, 48", 32-watt, fluorescent light fixtures
in the angled ceiling panels and side walls. Each
is sealed behind clear tempered safety glass.
All fixtures are UL listed and approved for their
intended use and placement. The light tubes
are not furnished with the fixtures.
CONSTRUCTION FEATURES AND QUALITY STANDARDS
All booth and plenum sections are made with
18-gauge galvanized steel. All product and
personnel access doors are pre-hung in heavy gauge galvanized steel frames for easy installation.
Brixon™ latches are provided for each door
opening.
Exhaust is provided by a 30" diameter tubeaxial
fan with a 3 HP, three-phase motor.
All hardware, filters and sealants needed for the booth installation
are included. The control panel and other electrical components
may be purchased separately.
Our Spray Booth products comply with all OSHA and NFPA
regulations.
Specifications
| Model # |
Int. Dimen. |
Ext. Dimen. |
Access
Doors |
Lights
Open |
Air
Flow
SCFM |
Fan Spec. |
Filters |
| Dia. |
HP |
Int. |
Exh. |
| SD-4000-26SB |
14' x 9' x 26' |
14'4" x 10'10" x 26'4" |
1 |
10 |
12600 |
30" |
3 |
23 |
16 |
| SD-4000-26PSB |
14' x 9' x 26' |
14'4" x 10'10" x 26'4" |
1 |
10 |
12600 |
30" |
3 |
15 |
16 |
|
