Laser Toe Angle Gauge II

Portable Front Wheel Alignment

High Speed Wheel Alignment- Portable - Simple to Operate - Extremely Universal - Highly Accurate and Repeatable. Ten times more accurate then any wheel alignment specs. The portable Laser Toe Angle Wheel Alignment Gauge II, now sold in 45 countries, is used by garages, major car manufacturers, tire manufactures, and educational institutes. The Laser Toe Wheel Alignment II was designed specifically for solving the problem of measuring wheel alignment toe angles rapidly and with a high degree of accuracy. This laser wheel alignment gauge has the ability to measure wheel alignment toe angle on front or rear suspension of ANY vehicle including automobiles, trucks, and tractor-trailers. It can be used in the shop, or even in a parking lot. This fully portable laser wheel alignment system, made mostly of fully anodized aluminum, weighs less than twenty pounds and breaks down to fit in the optional, handmade, precision instrument case - not much larger than a rifle case. It comes with all hardware, instructions, and angle to fraction conversion charts. Combine the LT2 with the Pro Smart Camber and you're in the two wheel alignment business for a fraction of the cost of a full scale alignment system!

Features & Benefits

Perfect for Automobiles, Trucks, Tractor Trailers, Buses, Stretch Limousines and Heavy Equipment Resolution - 1/60 of a degree Accuracy - proven by one of our customers, a major car company, to be more repeatable than Bear & Hunter alignment systems. It can even calibrate them!! Readings in less than two minutes. Level surface not required Wheels from 5" - 28" Battery Powered Optional carrying case Used by BMW and Ford to calibrate automated alignment system and used at their test track. Some of the current automotive users - BMW, Ford, Firestone Tire, John Deere Tractor, MEA Training Center, high schools, colleges and universities.

Top View Looking Down

Adjust uprights and locating pins to wheel size. Place laser and mirror section with pins against wheels. Adjust leveler "A" for laser beam to hit the approximate vertical center of mirror. Adjust leveler "B" to move laser beam vertically to reflect back to the same height as laser output. Adjust laser adjustment "C" to move laser beam horizontally to laser output scribeline. Repeat step 2 and 3-5 if necessary to maintain laser reflection at the scribeline. Read dial indicator for toe angle. Each division on the dial equals a one minute angle or 1/60 of a degree. Example: .030" or 30 divisions on the dial equals 30/60 of a degree or .5 degrees of toe angle. NOTE: For fast lube applications, once the initial procedure is done at the place that all alignment checking will be performed, steps 2 and 5 will only be required to get a toe angle reading.

Optional Carrying Case