Photo Gallery (1 photos)

$24,792.44

With the HD 1200 ECL Corghi has further developed the high performance, reliability and safety which, together with technological innovation and high quality, are the hallmarks of its products and have made us the world leader in this sector.The technical solutions and quality of the materials used are the strengths of this machine, which amply meets the demands made upon it, even in the most heavy duty applications, offering excellent value for money.This automatic tire changer is ideal for truck, coach, agricultural and earth moving equipment tires.Operation is electro-hydraulic and the controls are mounted on a low voltage mobile unit.The hydraulic power pack is separate from the machine to enable flexible installation in terms of the available space. The flexible coupling combined with the two hydraulic immersion pumps ensure quiet operation.The two-speed, bi-directional hydraulic turntable features the best design and materials and ensures optimal wheel locking during clamping, bead breaking and tire demounting. The high torque facilitates handling even the most difficult tires.The tool arm has two locking positions for working even with the widest tires, and has synchronised, opposed motion relative to that of the spindle carriage for higher working speed.The tool mount, in nodular cast iron, is equipped with an overhanging bead breaker disk on tapered roller bearings for long life and smooth running. The special disk shape has been designed for optimal penetration between the edge of the rim and the bead; the outer hemispherical profile is designed to avoid damaging the tire. The tool used is fully tested and has an effective protective coating.

• Automatic tire changer for drop centre wheels and tubeless tyres for commercial vehicles, trucks and coaches, and wheels with rim rings
• Electro-hydraulic operation
• Mobile control unit separate from the machine
• Hydraulic power pack separate from the machine
• Wheel clamping with two-speed bi-directional hydraulic turntable
• Machined steel tool arm
• Two-position locking tool arm
• Stroke synchronisation between the tool arm and the spindle carriage
• Manual tool rotation
• Overhanging bead breaker disk mounted on tapered roller bearings
• Equipped with hydraulic pressure gauge
• Tool arm axial stroke 830 mm
• Tool arm axial positioning speed 130 mm/s
• Tool arm axial working speed 60 mm/s
• Tool arm max. axial inside bead breaking pressure 27100 N
• Tool arm max. axial outside bead breaking pressure 30800 N
• Tool arm radial stroke 130 mm
• Tool arm rotation : manual
• Tool arm clamping : manual
• Tool arm clamping positions : 2
• Spindle carriage axial hydraulic stroke 830 mm
• Spindle carriage axial positioning speed 130 mm/s
• Spindle carriage axial working speed 60 mm/s
• Spindle clamping system : hydraulic turntable
• Spindle rotation motor 1.5/2.2 Kw
• Spindle second rotation speed 7 rpm
• Spindle first rotation speed torque 5300 Nm
• Spindle second rotation speed torque 3400 Nm
• Spindle clamping part : 4 clamps
• Spindle clamping capacity 11" - 56"
• Spindle max. clamping force 59200 N
• Spindle max. hydraulic pressure 140 bar
• Spindle max. tire diameter 2500 mm
• Spindle max. tire width 1420 mm
• Spindle max. wheel weight 1200 kg
• Spindle min. wheel centre diameter 120 mm
• Spindle min. working height at spindle shaft 385 mm
• Control unit operation : electro-hydraulic
• Control unit motor 3.3/4 kw
• Control unit adjustable hydraulic pressure 90 - 140 bar
• Control unit oil tank 12 l
• Control module control signal transmission : cable
• Control module voltage 24 V
• Control module weight 8 kg
• Power supply : electric 3-phase 230/400 V – 6.5 kW
• Noise level : operating level < 70 dB (A)
• Weight : 2640 Lbs.
• Tire Diameter : 98"
• Tire Width : 48"
• Rim Width : 11"-56"