Photo Gallery (1 photos)

Call for price

Air flows in through the filtered air intake plenum (located in the ceiling toward one end of the booth) downward through the work area and into the exhaust chamber located in the lower opposite end of the room. Filtered exhaust air is drawn through the exhaust plenum and is discharged upward into the atmosphere through the exhaust stack.

• Features
  • Easy To Install
  • Easy To Operate
  • Easy To Maintain
  • Easy To Quick Ship
  • Our Spray Booth products comply with all OSHA and NFPA regulations.

• Lighting Features - Bright full booth illumination is provided by four-tube, 48", 32-watt, fluorescent light fixtures in the ceiling panels. Each is sealed behind clear tempered safety glass. All fixtures are UL listed and approved for their intended use and placement. The light tubes are not furnished with the fixtures.

• Construction Features and Quality Standards - All cabin and plenum sections are made with 18-gauge steel. The personnel access door is prehung in heavy gauge steel galvanized frames for easy installation. Brixonlatches are provided for the door opening. One 14" x 48" observation window is standard in all paint mix room personnel doors. The exhaust system is driven by a 14" diameter tubeaxial fan with a 1/2 HP motor, producing 1930 SCFM at 1/2" static pressure. All hardware, installation instructions and sealants needed for the booth installation are included. The control panel and other electrical components may be purchased separately.

• Specifications
  • Interior Dimensions : 8' x 8' x 12'
  • Exterior Dimensions : 8'4" x 8'2" x 14'6"
  • Access Doors : 1 with Window
  • Lights
    • Open : 1
    • S and G : 0
  • Air Flow(SCFM) : 1930
  • Fan Diameter : 14"
  • Fan HP : 1/2
  • Filters
    • Int. : 4
    • Exh. : 2