Add extreme versatility in both feed rates and arbor speeds to our World Class model 8922 and you have the model 8944. Infinitely adjustable feed rates, multiple arbor speeds offers the most in versatility for the experienced lathe technician. The Accu-turn model 8944 Variable Speed Bench lathe incorporates Accu-turn's legendary one cut finish performance with the advanced capabilities that infinitely adjustable feed speeds and multiple arbor speeds offer the discerning technician. With three available arbor speeds, and infinitely adjustable rotor and drum feed speeds, you have complete control over the microfinish surface machined.
- Infinitely adjustable rotor feed speed, .001 to .010"
- Three easily selectable arbor speeds, 100, 150, 200
- Positive rake, one pass, finishing capability
- True machine shop construction; dovetail ways and adjustable gibbs
- Tapered roller bearing spindle design for maximum longevity
- 470 lb. Casting mass eliminates transient vibrations
- One HP externally mounted motor drives arbor only
- Independent high performance DC servo motors handle feed requirements.
- Infinetly adjustable feed rates You have the ability to easily modify the feed rate with the turn of a dial. Reduce the cut time or increase the microfinish dependent on the jobs needs. Now you have the versatility.
- Three arbor speeds Easily change arbor speeds in seconds, Choose 100, 150 or 200 RPM dependent on the size of work at hand. Speed up for smaller import work, slow down for larger truck work.
- Positive rake cutter tip angle Provides for one pass finish virtually everytime, allowing you to complete the work faster than multiple pass machining processes. Metal and heat come off the top of the tip as you machine allowing for, regardless of the amount of material.
- Dovetail Way and Adjustable Gibb Design The most dependable repeat guidance system in the machining industry. System provides for the ability to adjust out any tolerance increase caused by years of wear. Maintain factory tolerances for the life of the lathe. Dovetail ways are covered by stainless steel way covers for maximum performance.
- Tapered Roller Bearing Spindle The lathe spindle is supported by Timken tapered roller bearings for years of maintenance free turning.
- Massive lathe housing casting Combining a total mass of 470 lbs and a solid table top platform design the 8944 eliminates transient vibrations ensuring a smooth uninterrupted surface finish on every pass.
- Independent DC feed motors Utilizing independent feed motors for rotor and drum improves the lathes versatility to machine all varieties of drums and rotors. Through a separated switch wiring we substantially reduce the possibility of catastrophic operator error.
- POWER REQUIREMENTS : Standard 115 Volt, 50/60 Hertz
- POWER REQUIREMENTS : Optional *220 Volt, 1 phase optional
- ROTOR : Capacity 4" - 24", 102-610 mm
- ROTOR : Maximum Width of Surface 4 1/2", 114 mm
- ROTOR : Maximum Thickness 2 1/4", 57mm
- DRUM : Capacity 6" - 28", 152 - 711 mm
- DRUM : Depth of Cut 6", 152mm
- FLYWHEEL (FLAT OR STEPPED) : Capacity 6" - 24", 152-610 mm
- FLYWHEEL (FLAT OR STEPPED) : Firction Surface Capacity 6", 152 mm
- DRUM/ROTOR/FLYWHEEL WEIGHT MAXIMUM : On Standard Arbor 150 lbs., 68 kg
- : On Heavy Duty Arbor 300 lbs., 136 kg
- SPINDLE SPEEDS : 100-150-200 RPM
- FEEDS PER REVOLUTION (Infinitely Variable) : Rotor 0.001"-0.010", 0.026 mm - 0.254 mm
- FEEDS PER REVOLUTION (Infinitely Variable) : Drum 0.0015" - 0.015", 0.039 mm - 0.381 mm
- FEEDS PER MINUTE (Infinitely Variable) : Rotor 0.25" - 1", 6.35 mm - 25.4 mm
- FEEDS PER MINUTE (Infinitely Variable) : Drum 0.375" - 1.5", 9.53 mm - 38.1 mm
- MOTOR : 1 HP, 0.700 kW
- WEIGHT : Net 474 lbs., 215 kg
- WEIGHT : Shipping Gross 535 lbs., 243 kg
|
