With slower arbor speeds and expanded cutting dimensions the 8989 is designed for those shops performing passenger, light, medium AND heavy duty truck work. With a wide selection of truck adapters and arbors available the 8989 can handle almost any machining job up to 600-lb. capacity. The Accu-turn model 8989 Truck lathe incorporates Accu-turn's legendary one cut finish performance with the capacity and speeds required to handle medium and heavy truck work. With two arbor speeds, slowing all the way down to 52 rpm the 8989 can safely and efficiently handle the largest truck work.
- Two spindle speeds designed for truck work, 52 & 105 rpm
- Full 10" drum resurfacing capability for complete truck coverage
- Positive rake, one pass, finishing capability
- True machine shop construction; dovetail ways and adjustable gibbs
- Tapered roller bearing spindle design for maximum longevity
- 500 lb. Casting mass eliminates transient vibrations
- One HP externally mounted motor drives arbor only
- Two arbor speeds of 52 and 105 rpm Provides safe, slow machining of rotors to 24" and drums to 28".
- Truck arbors and extensive accessories Featuring two truck shops with 1 7/8" OD arbor standard, either with or without an outboard support expanding the machining capacity to 600 lbs, the 8989 says TRUCK.
- Expanded facing width Rotors to 4.5" and drums to a full 10" facing width gives you the range to handle just about anything you can fit in your building.
- Positive rake cutter tip angle Provides for one pass finish virtually everytime, allowing you to complete the work faster than multiple pass machining processes. Metal and heat come off the top of the tip as you machine allowing for one pass machining with virtually any depth of cut. Get it in, get it out faster then any lathe in the industry.
- Dovetail Way and Adjustable Gibb Design The most dependable repeat guidance system in the machining industry. System provides for the ability to adjust out any tolerance increase caused by years of wear. Maintain factory tolerances for the life of the lathe. Dovetail ways are covered by stainless steel way covers for maximum performance.
- Tapered Roller Bearing Spindle The lathe spindle is supported by Timken tapered roller bearings for years of maintenance free turning, the same system that automotive spindles have relied on for years.
- Massive lathe housing casting Combining a total mass of 500 lbs and a solid table top platform design the 8989 eliminates transient vibrations ensuring a smooth uninterrupted surface finish on every pass. Cutting platform actually sits in a 200 lb iron casting, not suspended on a support mechanism
- Independent AC feed motors Utilizing independent feed motors for rotor and drum improves the lathes versatility to machine all varieties of drums and rotors. Through a separated switch wiring we substantially reduce the possibility of catastrophic operator error. Providing smooth, consistent feed, day in and day out for years.
- POWER REQUIREMENTS : Standard 115 Volt, 50/60 Hertz
- POWER REQUIREMENTS : Optional *220 Volt, 1 phase optional
- ROTOR : Capacity 4" - 24", 102-610 mm
- ROTOR : Maximum Width of Surface 4 1/2", 114 mm
- ROTOR : Maximum Thickness 2 1/4", 57mm
- DRUM : Capacity 6" - 28", 152 - 711 mm
- DRUM : Depth of Cut 10", 254 mm
- FLYWHEEL (FLAT OR STEPPED) : Capacity 6" - 24", 152-610 mm
- FLYWHEEL (FLAT OR STEPPED) : Firction Surface Capacity 6", 152mm
- DRUM/ROTOR/FLYWHEEL WEIGHT MAXIMUM : On Standard Arbor 150 lbs., 68 kg
- : On Heavy Duty Arbor 300 lbs., 136 kg
- DRUM/ROTOR/FLYWHEEL WEIGHT MAXIMUM : On Heavy Duty Arbor with Outboard Support 600 lbs., 273 kg
- SPINDLE SPEED : 52-105 RPM
- FEEDS PER REVOLUTION : Rotor 0.0030", 0.077 mm
- FEEDS PER REVOLUTION : Drum 0.0046"/0.0092", 0.117 mm-0.234mm
- MOTOR : 1 HP, 0.700 kW
- WEIGHT : Net 500 lbs., 227 kg
- WEIGHT : Shipping Gross 560 lbs., 255 kg
|
