Our original World Class bench lathe, the 8922 is the best passenger and light truck machining lathe in the industry. Ideal for both passenger and truck machining, the 8922 is easy to operate and eliminates confusion for less experienced technicians. The Accu-turn model 8922 bench lathe incorporates Accu-turn's legendary one cut finish performance with the simplicity and durability required for all levels of technicians. With a fixed feed speed and fixed arbor speed the 8922 produces superior surface finish, parallelism and flatness every time. Designed to handle virtually all passenger and light truck rotors, drums and flywheels the 8922 will handle all your machining needs.
- Positive rake cutter tip angle Provides for one pass finish virtually everytime, allowing you to complete the work faster than multiple pass machining processes. Metal and heat come off the top of the tip as you machine allowing for one pass machining with virtually any depth of cut. Get it in, get it out faster than any lathe in the industry.
- Dovetail Way and Adjustable Gibb Design The most dependable repeat guidance system in the machining industry. System provides for the ability to adjust out any tolerance increase caused by years of wear. Maintain factory tolerances for the life of the lathe. Dovetail ways are covered by stainless steel way covers for maximum performance.
- Tapered Roller Bearing Spindle The lathe spindle is supported by Timken tapered roller bearings for years of maintenance free turning, the same system that automotive spindles have relied on for years.
- Massive lathe housing casting Combining a total mass of 470 lbs and a solid table top platform design the 8922 eliminates transient vibrations ensuring a smooth uninterrupted surface finish on every pass. Cutting platform actually sits in a 200 lb iron casting, not suspended on a support mechanism
- Independent AC feed motors Utilizing independent feed motors for rotor and drum improves the lathes versatility to machine all varieties of drums and rotors. Through a separated switch wiring we substantially reduce the possibility of catastrophic operator error. Providing smooth, consistent feed, day in and day out for years.
- Positive rake, one pass, finishing capability
- True machine shop construction; dovetail ways and adjustable gibbs
- Tapered roller bearing spindle design for maximum longevity
- 470 lb. Casting mass eliminates transient vibrations
- One HP externally mounted motor drives arbor only
- Independent high performance AC servo motors handle feed requirements.
- POWER REQUIREMENTS : Standard 115 Volt, 50/60 Hertz
- POWER REQUIREMENTS : Optional *220 Volt, 1 phase optional
- FEEDS PER REVOLUTION (DRUM & ROTOR) : 003, 0.076 mm
- ROTOR : Capacity 4"-24", 102-610 mm
- ROTOR : Maximum Width of Surface 4 1/2", 114 mm
- ROTOR : Maximum Thickness 2 1/4", 57mm
- DRUM : Capacity 6" - 28", 152 - 711 mm
- DRUM : Depth of Cut 6", 152 mm
- FLYWHEEL (FLAT OR STEPPED) : Capacity 6" - 24", 152-610 mm
- FLYWHEEL (FLAT OR STEPPED) : Firction Surface Capacity 6", 152mm
- DRUM/ROTOR/FLYWHEEL WEIGHT MAXIMUM : On Standard Arbor 150lbs., 68 kg
- DRUM/ROTOR/FLYWHEEL WEIGHT MAXIMUM : On Heavy Duty Arbor 300 lbs., 136 kg
- SPINDLE SPEED : 105 RPM
- FEEDS PER REVOLUTION : Rotor 0.0030", 0.077 mm
- : Drum 0.0046", 0.117 mm
- MOTOR : 1 HP, 0.700 kW
- WEIGHT : Net 469lbs., 213 kg
- WEIGHT : Shipping Gross 530 lbs., 241 kg
|
