QUALITY 9,000 LB.CAPACITY DIAMOND PLATED AUTOMOTIVE SERVICE AND STORAGE LIFT

This lift normally sells for 1895.00 (immediate shipping).
PREORDER Coupon Value of $300.00.

MANUFACTURED IN AN ISO 9001 REGISTERED FACILITY!

You can pick it up with a trailer at a local terminal (they will load it on your trailer with a forklift) if you can handle unloading it with 3 friends... or if you can get a forklift, backhoe or big engine crane.

View our photo gallery by clicking on the pictures.


Commercial lease to own (OAC) on approved credit

12 mos. - $267

24 mos. - $137.98

36 mos. - $98.19

48 mos. - $79.48

60 mos. - $69.63

• Great Lift - Great Features

  • New safety release interconnect - due to our old design constantly working itself loose, we now use a heat treated sleeve and drill through the 2 steel rods and fasten the 3 pieces with bolts.(pictures 7-8) The old safety release rod design used 2 jam nuts and one coupler bolt that constantly worked loose and caused the 1/4" end linkage to bend.(This troublesome design is still widely used in the lift industry)

  • Picture 10 in the gallery is very important, it shows our New Pulley Axle Locking Feature. Due to an occasional call regarding a pulley axle bending or an axle working its way loose, we decided to add a locking mechanism that holds the axle stationary rather than loose in the crossrail. This change, we feel, will extend the life of the cross rail (no ovalling) and save the pulley bushings as well as the pulley and cable.

  • New Approach Ramps, due to our old design (basically a piece of diamond plate with 3 bends) caving in under weight, we decided to start with 5 pieces of steel and fillet weld the parts together - not a big deal but 4 times the labor and cost on our end. The Best part is they are free with the lift!
    
    
  • Clean High Quality welds.

  • Factory Assembled Safety Linkage.

  • Heat Treated Pulleys with quality bronze bushings.(picture 11)

  • Optional - High Quality Casters with phenolic wheels, ball bearing axles and swivels plus grease fittings so they last. (see pictures no.14-15 in our photo gallery!)
  
  
• Installation in 6 Easy Steps
  1. Layout

  2. Structure Assembly
     1. 4 columns
     2. 2 Cross rails
     3. 2 Runways

  3. Routing of cables (they are already factory installed under the power side runway).
     1. Top caps
     2. Adjust cable tension

  4. Fill Hydraulic Power Unit
     1. 2 Hoses to Connect

  5. Safety Rods
     1. 2 big
     2. 4 small 1/4"
     3. 8 heim ends
     4. 2 eye bolts

  6. Approach Ramps
     1. Stationary Runway Stoppers
     2. Removable Runway Stoppers

• Specifications

  • Overall Length – Not Including Ramps : 169-1/4"

  • Drive On Ramps : 36-5/8"

  • Overall Width : 105"

  • Height To Top Of Track : 73"

  • Height To Bottom Of Track : 69"

  • Height To Top Of Post : 82-1/8"

  • Distance Between Tracks : 37-3/8"

  • Width Of Track : 18-5/8"

  • Aprrox. Distance Between Posts : 92"
  
  

• 110 Volt: $0.00
• 220 Volt: $0.00

• Included, $ 99.00 value: $0.00
• Not included: $0.00

• Yes, $ 199.00 value: $0.00
• No: $0.00

• Yes, $ 199.00 value: $0.00
• No: $0.00