Photo Gallery (1 photos)

$5,900.00

Air flows in through the filtered double entry doors in the front of the booth, passes through the booth's working area, and into the filtered exhaust chamber located in the rear of the booth. This filtered exhaust air is drawn through the exhaust plenum and discharged upward into the atmosphere through the exhaust stack. Our EZ industrial booths make efficient use of your valuable floor space and are available in three heights to accommodate your needs.

Note: Other dimensions are available, please call for details

• Features
  • Our Spray Booth products comply with all OSHA and NFPA regulations.

• Lighting Features - Bright full-booth illumination is provided by four 48", four-tube, 32-watt fluorescent light fixtures placed in the ceiling panels and side walls. Each is sealed behind clear tempered safety glass. All fixtures are UL listed and approved for their intended use and placement. The light tubes are not furnished with the fixtures.

• Construction Features and Quality Standards - All booth and plenum sections are made with 18-gauge galvanized steel. All product and personnel access doors are pre-hung in heavy gauge galvanized steel frames for easy installation. Brixon latches are provided for each door opening. A tube axial type duct fan and motor specifically designed and constructed for use in paint spray booths and similar applications is provided for exhaust. All hardware, installation instructions and sealants needed for the booth installation are included. The control panel and other electrical components may be purchased separately.

• Specifications
  • Interior Dimensions : 12' x 8' x 12'4"
  • Exterior Dimensions : 12'4" x 8'2" x 12'8"
  • Access Doors : 1
  • Lights (Open) : 4
  • Air Flow(SCFM) : 9600
  • Fan Diameter : 30"
  • Fan HP : 2
  • Filters
    • Int. : 24
    • Exh. : 20
  • Nominal Door Opening
    • Width : 11'4"
    • Height : 7'10"
    • QTY : 1
    • Type : Filtered